Papers

Improvement of a pharmaceutical powder mixing process in a tote blender via DEM simulations

B. Benque, L. Orefice, T. Forgber, M. Habeler, B. Schmid, J. Remmelgas, J. Khinast, Improvement of a pharmaceutical powder mixing process in a tote blender via DEM simulations, International Journal of Pharmaceutics, Volume 658, 2024, 124224, ISSN 0378-5173.

Measuring permeability and flowability of powders at various packing fractions

Lupo M, Neveu A, Gemine T, Francqui F, Lumay G, “Measuring permeability and flowability of powders at various packing fractions”. Particuology, 4 April 2024

Investigating the production of ASSB composite cathodes by numerical simulation of the stressing conditions in a high-intensity mixer

Frankenberg F, Kissel M, Burmeister C, Lippke M, Janek J, Kwade A, "Investigating the production of all-solid-state battery composite cathodes by numerical simulation of the stressing conditions in a high-intensity mixer". Powder Technology, Volume 435, 15 February 2024, 119403

A novel methodology for data analysis of dynamic angle of repose tests and powder flow classification

Orefice L, Remmelgas J, Neveu A, Francqui F, Khinast J.G, “A novel methodology for data analysis of dynamic angle of repose tests and powder flow classification”. Powder Technology, Volume 435, 15 February 2024, 119425

A binder-free dry coating process for high sulfur loading cathodes of Li–S batteries: A proof-of-concept

Horst M, Burmeister J, Abdollahifar M, Pillitteri S, Kwade A, “A binder-free dry coating process for high sulfur loading cathodes of Li–S batteries: A proof-of-concept”, Journal of Power Sources (Volume 587,2023)

Powder Characterisation for Pharmaceuticals: Beyond Standards

Neveu A, Lupo M, Francqui F, “Powder Characterisation for Pharmaceuticals: Beyond Standards”. ONdrugDelivery, Issue 148 (May/June 2023), pp 16–19.

Additive manufacturing of a high-performance aluminum alloy from cold mechanically derived non-spherical powder

Martin, J.H., Barnes, J.E., Rogers, K.A. et al. Additive manufacturing of a high-performance aluminum alloy from cold mechanically derived non-spherical powder. Commun Mater 4, 39 (2023). https://doi.org/10.1038/s43246-023-00365-4

Powder Characterization For DPI Performance In Capsule-Based Inhalers

Pillitteri S, Neveu A, Zellnitz-Neugebauer S, “Powder Characterisation for DPI Performance in Capsule-Based Inhalers”. ONdrugDelivery, Issue 140 (Nov 2022), pp 77–81.

Measuring powder flow properties in a rotating drum

Neveu A, Francqui F, Lumay G, “Measuring powder flow properties in a rotating drum”, Measurement, Volume 200, August 2022, 111548.

Influence Of Additives On The Electrostatic Charge Build-Up Of Excipients - 2022

Neveu A, Patel D, Francqui F, “Influence of Additives on the Electrostatic Charge Build-Up of Excipients”. ONdrugDelivery, Issue 135 (Jul 2022), pp 12–15.

Calibration of DEM simulations for dynamic particulate systems

Windows-Yule C, Neveu A, "Calibration of DEM simulations for dynamic particulate systems". Papers in Physics, vol. 14, art. 140010 (July 2022)

How to Relate the Spreadability of Powder to the Layer Homogeneity in Powder Bed Fusion Additive Manufacturing - 2022

A. Neveu, F. Francqui, and G. Lumay, in Progress in Additive Manufacturing 2020, ed. N. Shamsaei and M. Seifi (West Conshohocken, PA: ASTM International, 2022), 40–50.

Metal powder characterisation for Additive Manufacturing: Beyond state-of-the-art standard - 2021

Metal Additive Manufacturing | Autumn 2021, Vol. 7 No. 3

Batch to Batch Differentiation For Quality Control in additive manufacturing - 2021

Neveu et al., “Batch to batch differentiation for quality control in additive manufacturing”, EuroPM2021 conference proceedings, Session 51: Testing & Evaluation: Powder Characterisation (2021), ISBN: 978-1-899072-54-5.

Impact of Powder Properties on the Rheological Behavior of Excipients - 2021

P. H. M. Janssen, S. Depaifve, A. Neveu, F. Francqui, B. H. J. Dickhoff. Pharmaceutics 2021, 13(8), 1198; https://doi.org/10.3390/pharmaceutics13081198.

Flowing Properties Of Spray-Dried Powders Before And After Granulation - 2021

G. Lumay, L. De Smet, F. Van der Gucht & F. Francqui

Packing Dynamics of Powders At High Temperature - 2021

Aurélien Neveu[1], Filip Francqui[1] and Geoffroy Lumay[2], EPJ Web of Conferences 249, 12001 (2021). . 1 GranuTools, Awans, Belgium. 2 GRASP Laboratory, CESAM research unit, University of Liège, Belgium

Spherical Boron Powders Prepared By Mechanical Milling In Immiscible Liquids - 2021

M. Mursalat, M. Schoenitz, E. L. Dreizin, A. Neveu, F.Francqui, Powder Technology, Volume 388, 2021, Pages 41-50, ISSN 0032-5910

Densification Behaviour and Three-Dimensional Printing of Y2O3 Ceramic Powder By Selective Laser Sintering - 2021

A. Ratsimba, A. Zerrouki, N. Tessier-Doyen, B. Nait-Ali, D. André, P. Duport, A. Neveu, N. Tripathi, F. Francqui, G. Delaizir, Volume 47, Issue 6, 2021, Pages 7465-7474, ISSN 0272-8842

Characterization of lactose powders for DPI applications - 2021

A. Neveu, M. Crowley, T. McGorisk, ONdrugDelivery, Issue N°119

Resources

Blog

Papers

Application notes

Improvement of a pharmaceutical powder mixing process in a tote blender via DEM simulations

Measuring permeability and flowability of powders at various packing fractions

Investigating the production of ASSB composite cathodes by numerical simulation of the stressing conditions in a high-intensity mixer

A novel methodology for data analysis of dynamic angle of repose tests and powder flow classification

A binder-free dry coating process for high sulfur loading cathodes of Li–S batteries: A proof-of-concept

Powder Characterisation for Pharmaceuticals: Beyond Standards

Additive manufacturing of a high-performance aluminum alloy from cold mechanically derived non-spherical powder

Powder Characterization For DPI Performance In Capsule-Based Inhalers

Measuring powder flow properties in a rotating drum

Influence Of Additives On The Electrostatic Charge Build-Up Of Excipients - 2022

Calibration of DEM simulations for dynamic particulate systems

How to Relate the Spreadability of Powder to the Layer Homogeneity in Powder Bed Fusion Additive Manufacturing - 2022

Metal powder characterisation for Additive Manufacturing: Beyond state-of-the-art standard - 2021

Batch to Batch Differentiation For Quality Control in additive manufacturing - 2021

Impact of Powder Properties on the Rheological Behavior of Excipients - 2021

Flowing Properties Of Spray-Dried Powders Before And After Granulation - 2021

Packing Dynamics of Powders At High Temperature - 2021

Spherical Boron Powders Prepared By Mechanical Milling In Immiscible Liquids - 2021

Densification Behaviour and Three-Dimensional Printing of Y2O3 Ceramic Powder By Selective Laser Sintering - 2021

Characterization of lactose powders for DPI applications - 2021

Instruments